Power and Control in a Single Device The T80 TurboChargerTM integrates Maximum
Power Point Tracking, battery charge management, state
of charge information and communications into a single
device. With 80 Amps continuous output, the has the
largest capacity in the industry by over 30%.
Optimum MPPT and Charging Efficiency The T80 captures up to 35% more power from the
photovoltaic (PV) array. Our Patent Pending MPPT algorithm
starts early and locks onto the peak power during
rapidly changing insolation and temperature.
Energy Monitor Built In The T80 includes a built-in Energy Monitor using
TriMetricTM Technology from Bogart Engineering. It
tracks power production and consumption to calculate
the energy remaining in the battery. State
of Charge (SOC) is displayed in Percent Full, Amp-hours,
Watt-hours and bar graph format. In
addition, 90 days of energy harvest history is stored
in the T80.
Continuous Rating to 45o
C (113o F) Ambient. The T80 TurboChargerTM produces full rated
power without de-rating up to 40oC ambient temperature.
Above that, the output current is reduced gradually
to protect the life of the T80 and then automatically
ramped up as the temperature decreases. High
efficiency power circuits and robust thermal design
minimize heat generation. The internal
temperature-controlled variable speed fan runs just
fast enough to maintain optimum reliability.
Enhance Battery Performance and Life Supports Flooded Lead Acid (FLA), GEL and Absorbed
Glass Mat (AGM) batteries. Four stage charging with
adjustable set points for all parameters.
Unequalled Communications The on-board RS-232 and slot for optional add-in
cards provide data communication to Remote Readouts,
PCs and the Internet. System performance can be monitored
remotely and the T80 accepts software upgrades from
a PC.
Reduce System Costs Our efficient MPPT technology dramatically reduces
the cost of a PV system by reducing the number of
PV panels required, eliminating the need for heavy
gauge wiring, and increasing the life of the storage
batteries.