• For PDFs
  •  
  • Get Adobe Acrobat Reader
  •  
Products

Remote Displays

RD 100 Wireless and RD Wired REMOTE READOUTS FOR THE T80 TurboCharger™

See the Video:

Solar Power 2007 Conference Wrap-up:
Apollo Solar President and CEO John Pfeiffer speaks with Steve Jarriel about our company and its technology to bring high efficiency and reliability to the electronics that make solar energy possible. See the video >>

T80 TurboCharger

T80 Charge Controller

T80

80 Amps continuous output at up to 45°C/113°F ambient temperature

Built-in Battery Energy Monitor

Patent Pending MPPT Provides Best Energy Harvest Available

Wire the PV modules in series up to 72 VDC nominal (140 Voc max)

Parallel T80's for higher currents: Stack Up to 16 units

Precision charging of 12/24/36/48V batteries with one-minute set-up and Fail-safe calculated defaults

Wired/Wireless Remote Displays

RD 100
RD 100 Wireless and RD Wired Features and Benefits
  • Displays comprehensive status of PV array, and Battery system
  • Battery State of Charge: % Full, Bar Graph and Amp-Hours
  • PV current and voltage
  • Battery charge/discharge Amps
  • 90 days of system history
  • Wireless version:
  • 100 foot range in buildings
  • 300 feet outside (line of sight)
  • Repeater available
  • FCC approved.
  • Includes rechargeable batteries
  • Wired version: CAT5 cable sends data and power from the T80
  • Desktop or wall mount
  • Transflective LCD with backlight


Click here for detailed specs in PDF version
 

Monitor the PV - Battery System from anywhere
Battery system management in a convenient portable package. See what the PV array, Charge Controller, Batteries and Load are doing any time. Check the results for each day for the last 90 days.

Battery Energy Monitor Display is Essential
The T80 TurboChargerTM includes a built-in energy monitor based on TriMetric technology which tracks power production and consumption then calculates the energy remaining in the battery. State of Charge (SOC) is displayed in Percent Full, Amp-hours and bar graph format. This is the "gas gauge" that is essential in battery based systems. The T80 goes further by recording 90 days of historical data on energy production, usage, and number of days since fully charged. The Remote Display shows all the information at a glance at a convenient location.

Wireless Option Card for the T80 TurboChargerTM
The Wireless DataComm Board installed in the T80 Option Card slot comes with a chassis mount antenna.

Simple installation
No set up or programming
The wireless version couldn't be easier, just turn it on. The wired version is plug and play. Either Remote Display can be added to any T80 TurboChargerTM in the field.

Wireless Version RD100
The wireless board includes in internal antenna and rechargeable NiMH batteries with on board charging. Charging input may be 12v to 24v DC or 115VAC using the plug-in wall transformer.

Wired version RD-Wired
The serial port in the T80 provides the data and power for the Remote Readout using a 4 wire cable.

Copyright © 2007 Apollo Solar | All Rights Reserved